News

The gate valve is a linear motion valve, and its opening and closing parts (the gate) realize the opening or closing of the valve through linear motion perpendicular to the direction of the fluid, ...

A Block Valve is a valve used to completely cut off or isolate the flow of fluid and is widely used in industrial pipeline systems. Definition and Function Definition: A Block Valve is a valve that...

1. Definition and Function Original : "Gates and valves are two common devices in the field of fluid control. Although they have similar functions, they have significant differences in structu...

NRS valve is short for Non-Rising Stem valve . Its stem does not move up and down during the opening and closing process but instead opens and closes the valve plate through rotational motion. 1. W...

The most common types of gate valves include the following, which are widely used in various industrial and civil scenarios due to their different structural characteristics, sealing methods, or dr...

There are many types of gate valves according to different classification standards. Common classification methods include structural characteristics, sealing methods, driving methods, etc. If clas...

Valve lobe, usually translated as "valve flap", is a key moving part inside the valve. The following is a detailed introduction to the valve flap 1. Definition and function The valve flap...

There are significant differences between gate valves and flow valves in many aspects. The following is a detailed comparison of the two. 1. Construction principle Gate valve The opening and closin...

Gate valves and check valves each play an important role in fluid control systems, and their uses are as follows: Purpose of gate valves Gate valves are mainly used to cut off or connect fluid medi...

Gate valves are widely used. They are mainly used to cut off or connect fluid media, and have certain functions such as regulation, diversion, backflow prevention, and pressure stabilization. Speci...

There are significant differences between lug valves and wafer valves in terms of structure, installation method, performance characteristics and applicable scenarios. 1. Structural differences Lug...

Gate valves can be divided into many types according to different classification standards. However, if we only look at the common classification standard of structural characteristics, gate valves...